Power and free
Power and Free Conveyor Systems
One running chain, many independent carriers. Stop, store and route loads without stopping the line.

Two Tracks, One Idea
An overhead power and free conveyor separates the drive from the load.
The upper power track carries a chain that never stops. Pusher dogs on the chain engage the trolleys in the lower free track and push them forward. At a stop, the trolley is lifted off the dog and waits; the chain keeps running for every other carrier.
That simple separation gives you accumulation, buffers, switches to parallel lanes and different dwell times along one line, which is why power and free is the standard in paint shops and storage systems.
Capabilities
What You Can Do With It
Accumulate
Carriers queue in front of stations or processes while the chain runs on.
Switch routes
Switches send carriers to parallel booths, ovens, repair loops or stores.
Run through heat
Heat-rated chain, bearings and lubricant for drying and curing ovens.
Carry heavy loads
Load bars over several trolleys for frames and large assemblies.
Drop and lift
Drop sections and lifts bring carriers to working height or into dip tanks.
Track every carrier
Carrier ID and PLC logic for routing by product or colour.
Sizing
Chain Sizes
| Chain | Pitch | Typical carriers |
|---|---|---|
| X-348 | 3 in | Light to medium, finishing and assembly |
| X-458 | 4 in | Medium to heavy, car bodies |
| X-678 | 6 in | Heavy machinery parts |
Final size follows from a chain pull calculation for your route, loads and temperatures.
Read our guide to chain pull calculation.
Overhead or Inverted?
Overhead power and free hangs the product below the track. It keeps floors free and suits most coating, assembly and storage lines.
Inverted power and free carries the product above the track. Nothing can fall onto painted surfaces and the top of the part stays accessible, which is why it is used for car bodies in paint booths.
- Overhead: free floors, simple maintenance access
- Inverted: clean conveying, work from above
- Both: accumulation, switches, heat-rated designs

Where it fits
Typical Applications
What is a power and free conveyor system?
A conveyor with two tracks: a power track with a continuously moving chain and a free track with load trolleys. Pusher dogs on the chain move the trolleys, and stops can release them so carriers wait or switch route while the chain keeps running.
Is an overhead power and free conveyor suitable for curing ovens?
Yes. With heat-rated chain, bearings and lubricant, power and free is one of the most common conveyors through paint and powder curing ovens.
Which chain size do I need?
It depends on carrier weight, trolley spacing and chain pull. X-348 is common for light to medium carriers, X-458 for medium to heavy and X-678 for heavy loads. We confirm it with a chain pull calculation.
Can a power and free conveyor be inverted?
Yes. In an inverted system the track runs below the product, which keeps dirt off painted surfaces and leaves the top free for work.
How much does a power and free conveyor cost?
It depends on length, carrier count, loads, switches and controls. Send your layout and we provide a budget range for your project.
Send us your layout. Get an engineer's answer.
Share a drawing, your products and the output you need. We reply within 24 hours with questions or a first concept.


